Talsa Sausage Fillers

Lid & Piston Stainless Steel The Talsa F14 sausage filler is the new model that replaces the old H15 model. The new F14s sausage fillers now have completely stainless steel lids and piston plates as well as an all stainless steel perfectly round chamber. The F14s sausage filler has a barrel with an internal tube to discharge air/water for simplified cleaning. The F14s filler features a control and safety gauge with a speed control knob set next to the operator for ease of use. The motor is started and stopped automatically by the use of the new ergonically designed all plastic knee lever, meaning a much lower consumption of electricicty as well as reduced heat build up and noise. This also helps to extend the life of the sausage filler oil and hydraulic components.

External Dimensions (WxDxH) 57x47x115cm Bowl Volume 14 litre Meat Capacity +/- 12kg Nozzles 3 x food approved thermoplastic of 14, 20 & 30mm as standard Motor 1.0HP (1 phase) or 0.75HP (3 phase) Hydraulic Oil Reserve 10 litre Construction stainless steel Lid & Piston Construction stainless steel Weight 120kg

The new Talsa F25s sausage filler is a newly designed model to replace the H20 and H26 sausage fillers. The new model has a high hydraulic power to fill the densest and most compact of mixtures. The sausage filler has its controls and safety gauge and speed control knobs close to the operator. The F25s sausage filler has a newly designed ergonomic plastic knee lever which can be fitted to the machine in two different orientations, which ever suits the operator better. The motor of the sausage filler only kicks in and stops by using the knee lever, resulting in reduce power consumtion, less heat and noise and extended life of the oil and hydraulic components. The F25s also now has automatic piston decompression, meaing that the mixture stops outputting from the machine straight away, unlike other fillers where the build of pressure leads to small amounts of mixture contunuing to come out even after releasing the knee lever. The knee lever of the sausage filler can also be locked into desent position and automatically disconnects once the piston hits the bottom position. The Talsa F25s is made of robust stainless steel, with the piston plates and lids now also made from stainless steel. The new production methods now mean the barrel is completely round inside. The lid and piton plate are completely removable by using the lid release bolts and piston screw. The F25s sausage filler now comes as standard with 3 x thermoplastic nozzles in 14, 20 and 30mm diameters. These plastic filler nozzles are transparent and allow for better tightening against the lid with the transparency making it easier for the operator to see the mixture extruding through the nozzle. The sausage filler has an internal oil reservoir with built-in level view (min / max) and two wheel and two anti tilt adjustable feet.

External Dimensions (WxDxH) see diagram Bowl Volume 25 litre Meat Capacity +/- 22kg Nozzles 3 x food approved thermoplastic of 14, 20 & 30mm as standard Motor 1.75HP (1 phase) or 1.5HP (3 phase) Construction stainless steel Lid & Piston Construction stainless steel Weight 140kg

The newly designed Talsa F35s sausage filler is the replacement of the old H31 sausage fillers. The F35s sausage filler has a robust design with a solid frame of lamiated stainless steel. The sausage filler piston plate and lid are also made of thick lamiated stainless steel and can be removed completely from the machine for ease of cleaning. The filler has a high hydraulic power which helps to fill the densest and most compact of mixtures The control and safety gauge as well as the speed control next to the operator. The F35s sausage filler has auto stop start that works directly from the newly designed knee lever, this results in a reduced power consumption, less heat and noise and extended life of the oil and hydraulic components. The sausage fillers knee lever is now made from soft plastic and is ergonomically deisgned to be comfortable to use. The knee lever can be fixed to the machine in two orientations to suit the operators needs. The knee lever can also be locked in descent mode and left alone as when it hits the bottom position the machine automatically turns off. The Talsa F35s sausage filler has a rectified barrel interior which is now perfectly round, in all stainless steel, even the bottom. The barrel also comes as standard with an internal tube for discharge or air / water, simplified for cleaning. The F35s sausage filler comes as standard with three thermoplastic transparent nozzles with diameters of 12, 20 and 30mm. These new nozzles allow for tighter fitting on the lid and also for the operator to see the mixture as it passes through the nozzle. The filler comes with two adjustable feet and two wheels which are anto slip.

External Dimensions (WxDxH) 57x53x115cm Bowl Volume 35 litre Meat Capacity +/-30kg Nozzles 3 x food approved thermoplastic of 14, 20 & 30mm as standard Motor 1.75HP (1 phase) or 1.5HP (3 phase) Construction stainless steel Lid & Piston Construction stainless steel Weight 160kg